INSTALLATION INSTRUCTIONS

If you choose to install your window coverings on your own, be sure to follow the instructions provided below to ensure a quality installation. If you have any questions, don't hesitate to contact our team for assistance.

Tools required: 

Comes with your order: 

 

Zebra Blinds | Sheer Shades | Roller Shades

Step 1: 

Measure and mark the bracket positions. The recommended spacing between the brackets is 20-32 inches. Ensure that the lines are straight and flush.

Step 2: 

If mounting onto your wall, use your power drill to make holes in the wall and insert drywall anchors. For wooden frames or walls with studs, you can bypass this step.

Step 3: 

Secure the mounting brackets in place using the screws provided.

Step 4: 

Tilt the cover slightly and insert the end of the bracket into the groove towards the front of the cassette.

Step 5: 

Push the cassette firmly inward and lift upward until you hear a click sound.

Step 6: 

Ensure that all mounting brackets are securely in place. If you chose a corded blind, fix the bracket onto the window frame. The chain should be tight but not under stress to ensure a smooth operation. 

 

Honeycomb Shades

Step 1:

Inside Mount: Mark the desired location on the top part of your window frame with a pencil.

Outside Mount: Mark the desired location on your wall with a pencil. 

Step 2:

Inside Mount: Use the holes on the top part of the bracket to secure in place inside the window frame.

Outside Mount: Use the holes on the back part of the bracket to secure in place on the wall.

Step 3: 

Insert the shade in the groove on the brackets and ensure it is clicked into place.

 

 

Curtain Tracks

Comes with your order: 

 

Step 1: 

If necessary, loosen the screw on the bracket to allow more space to click onto the track.

Step 2: 

If your track came in multiple pieces, use a joiner to attach all pieces together. Ensure you place the brackets close to the joiners for added sturdiness.

Step 3: 

Click the brackets onto the track, placing one on each end and the others spaced evenly in between. The grooves on the track should fit snugly into the bracket.

Step 4: 

Tighten the brackets onto the track with the screw provided.

Step 5: 

Measure and mark where each bracket will be installed, ensure it is straight and level.

Step 6: 

If mounting onto your wall, use your power drill to make holes in the wall and insert drywall anchors. For wooden frames or walls with studs, you can bypass this step.

Step 7: 

Secure the brackets onto the wall or ceiling using the screws provided.

Step 8: 

Use the hooks provided to attach your new draperies to the track. Hook each clip to a runner on the track.

Step 9 (optional)

To complete the look, use a steamer to remove any wrinkles and creases from your drapes and enjoy!